What You Can Expect From a Home Inspection

 Foundation/Structure

• Inspect condition of framing and structure and report any visible defects
• Check floors for severe settlement
• Inspect all exposed materials
• Inspect exposed areas of slab or floor for signs of visible water infiltration
• Inspect any accessible crawl space or basement for visible signs of moisture
• Report condition of mortar joints for visible cracking or deterioration

Exterior

• Report on overall condition of windows and doors
• Inspect condition of exterior caulking, protective paints, stains and scalants
• Inspect condition of weather stripping
• Inspect locking mechanisms for proper operation
• Report on the presence of any Exterior Insulated Finishing Systems (EIFS)
• Report on material and overall condition of exterior surfaces and components

Grounds

• Evaluate grading immediate to house
• Note areas where siding is improperly in contact with grade
• Report on visible damage to house caused by trees and shrubs
• Inspect condition of retaining walls adjacent to house
• Report on signs of soil erosions
• Observe drainage around house
• Inspect condition of stoops and stairs

Electrical

• Report on Grounding
• Report on Panel and Service size and presence of over-current protection
• Inspect condition of visible wiring
• Evaluate existing Ground Fault Circuit Interupters
• Report on the presence of Aluminum Branch wiring
• Observe condition of Electric Panel and Components
• Evaluate receptacle poloartiy

Cooling

• Observe condition of venting
• Inspect air conditioner
• Observe overflow pan and drain
• Evaluate condition of condensation drain
• Report presence and condition of filter

Plumbing

• Report on visible leaks
• Inspect Water Heater and presences of temperature pressure relief valve
• Observe Supply Line and Main Shut-Off
• Check for proper venting
• Operate outdoor Hose Bibs
• Check traps for leaks, improper venting and corrosion
• Inspect visible supply, drain and waste components
• Evaluate function flow and drainage
• Report on any visible Polybutylene

Roof/Eaves

• Report on Substandard Repairs
• Report missing shingles and sign of wear
• Inspect condition of flashings, valleys, skylights, vents and roof penetrations
• Report on presence and condition of FRT Plywood
• Report on overall structural condition of visible framing components
• Evaluate attic for ventilation
• Inspect overhands and eaves